Description
📍Dimensions: 8x8x14.5cm
📍Weight: 238g
📍Capacity: 260ml
📍Color: Gray/ Chocolate
📍Recommended age: 6 months and above
📍Material: Main body-stainless steel 316/ Lid and handle-polypropylene+thermoplastic elastomer/Suction nozzle rubber seal-silicon rubber
📍Heat resistance: main body-800℃/ cover and handle-100℃/ rubber parts-180℃
🌟Stainless steel double-layer insulation structure, excellent thermal insulation performance, can maintain temperature for a long time.
🌟BPA-free, safe to use.
🌟The inner bottle is made of medical-grade high-quality stainless steel 316, which has excellent heat preservation rate and corrosion resistance.
🌟The locking device prevents the contents from leaking easily, lift the ring to lock, lower the ring to unlock. Babies can easily open and close by themselves
🌟The inside of the tip of the straw is "V" shaped to prevent water leakage.
※The straw must be bitten lightly to suck out the contents.
🌟Korean design and quality control, Chinese OEM production.
How to wash before first use:
1. Before first use, apply a small amount of cooking oil to a kitchen towel and wipe the inside of the main body until no abrasive comes out.
2. Put warm water mixed with vinegar and baking soda into your body and let it sit for 2 hours.
3. Use baby bottle cleaner (clean with neutral detergent, then rinse with water several times)
⚠️Do not use hot water disinfection/bottle sterilizer/microwave oven/dishwasher for the bottle body, and boiled water can be used for disinfection inside. Please use a soft sponge to clean the outside of the fuselage.
⚠️Lid and handle/suction nozzle rubber sealing ring-can use a variety of disinfection methods, hot water, steam (within 1 minute), microwave oven (within 3-5 minutes), UV machine
※Suction nozzle rubber sealing ring is not recommended to be sterilized by a UV machine, because silicone products may change color or become hard after being sterilized by ultraviolet rays.
How to Properly Assemble a Straw Cup
1. When assembling the lid and straw nipple, be sure to pull the straw nipple to the bottom.
2. Make sure the air valve at the tip of the straw is not rolled up.
3. After assembling the faucet
Insert the marked part and make sure to install the rubber grommet.
※Children may have difficulty drinking or leak water if precautions are not followed.